Installation

Hardware Installation

This page will provide direction and links to hardware components that you need to install. Please start with section one and move down according to your set up.

Core Unit Installation

Step 1

If you have just received a new VersaCall system, you will want to start with installing the VersaCall Computer or Control Unit.

There are 3 types of Control Units:

• 

  Mini Control Unit

• 

  Standard Control Unit

• 

  Rack Mount Control Unit

    1. CLICK HERE to view the step by step guide on installing a Mini Control Unit.

    2. CLICK HERE to view the step by step guide on installing a Standard Control Unit.

    3. CLICK HERE to view the step by step guide on installing a Rack Mount Control Unit.

Step 2

If you control unit is up and running, the next item to install is the Mesh Coordinator.

There are 2 types of Coordinator:

• 

  USB Coordinator

• 

  Remote Coordinator

    1. CLICK HERE to view the step by step guide on installing a USB Coordinator.

    2. CLICK HERE to view the step by step guide on installing a Remote Coordinator on the Same Subnet.

    3. CLICK HERE to view the step by step guide on installing a Remote Coordinator on a Different Subnet.

Step 3

If you purchased a paging transmitter, please use one of the guides below. If you did not purchase a paging transmitter, proceed to Step 4.

There are 2 types of Paging Transmitters:

• 

  USB Transmitter

• 

  Remote Transmitter

    1. CLICK HERE to view the step by step guide on installing a USB Paging Transmitter.

    2. CLICK HERE to view the step by step guide on installing a Remote Paging Transmitter on the Same Subnet.

    3. CLICK HERE to view the step by step guide on installing a Remote Paging Transmitter on a Different Subnet.

Step 4

If you purchased a phone modem, please use the guide below. If you did not purchase a phone modem, proceed to Step 5.

• 

  USB Transmitter

    1. CLICK HERE to view the step by step guide on installing a Phone Modem.

Step 5

If you purchased a 2-way radio, please use the guide below. If you did not 2-way radio, proceed to Module Installation.

• 

  USB Transmitter

    1. CLICK HERE to view the step by step guide on installing a 2-Way Radio.

Module Installation

Call Station

There are 2 types of Call Stations, Battery and Powered.

• 

  Battery

• 

  Powered

    1. CLICK HERE to view the step by step guide on installing a Battery Powered Call Station.

    2. CLICK HERE to view the step by step guide on installing a Powered Call Station.

BSC Module

There are 2 types of BSC, Touch Screen with an IO Module and Touch Screeen without an IO Module.

• 

  IO Module

• 

  Touch Screen

    1. CLICK HERE to view the step by step guide on installing a BSC without an IO Module.

    2. CLICK HERE to view the step by step guide on installing a BSC with an IO Module.

TIM Module

A Touch Input Module has 2 pieces a Touch Screeen and an IO Module.

• 

  IO Module

• 

  Touch Screen

    1. CLICK HERE to view the step by step guide on installing a Touch Input Module.

PSM Module

A Production Status Module has 2 pieces a Touch Screeen and an IO Module.

• 

  IO Module

• 

  Touch Screen

    1. CLICK HERE to view the step by step guide on installing a Production Status Module.

Repeater

A Repeater is used to extend the mesh signal range.

• 

    1. CLICK HERE to view the step by step guide on installing a Repeater.

Wireless Audio Module

There are 2 types of Audio Module, Tone Only and MP3.

• 

  Tone Only

• 

  MP3 IO

• 

  MP3 Speaker

    1. CLICK HERE to view the step by step guide on installing a Tone Only Audio Module.

    2. CLICK HERE to view the step by step guide on installing an MP3 Audio Module.

Wireless Lights Module

Wireless Light Modules come with light stack containing 1 to 5 lights.

• 

  5 Color Light

    1. CLICK HERE to view the step by step guide on installing a Wireless Lights Module.

    If your hardware is not listed or you are having installation issues, contact VersaCall Support for further assistance.