VT3000 - Setup - Device Monitoring

---

---

Overview Email can be set up in 2 different ways – Anonymous SMTP and Authenticated SMTP. Check with your IT department to determine which type works best with your network. Emails and Text Messages are sent out using the SMTP server.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software. 3. At least one Output setup and receiving communications successfully. 4. At least one Device (Hardware or Software) powered and communicating with the system.

---

---

Video

---

---

Step 1. Open the VT3000 web interface – select VT3000 Core Software - log in – select Administration - System Settings - Global. Administration System Settings Global

---

Step 2. Scroll down to the System Monitoring section at the bottom of the page.

---

Step 3. Select the Monitoring Option that best fits your needs. Do Not Monitor - this is the default setting, nothing will be monitored. Errors Only - select this option to monitor only errors (Low Battery, Bad SD Card & File Not Received). Everything - select this option to monitor errors and communications between the device & the coordinator. Devices check in with the coordinator every 30 - 45 minutes, if that check in is missed that error will be communicated.

---

Step 4. Select the down arrow for the Output field - select an individual Output to communicate or an Output Group to communicate with.

---

Step 5. Select the Save & Exit button in the top right corner of the page.

---

Step 6. A warning message will appear stating that you must restart the VT3000 Service - select OK.

---

Step 7. The VT3000 service must be restarted Click Here for instructions.

---

---

Select a Guide Here Add a Pager Add an Email Add a Cell Phone (Text Message) Add a Two-Way Radio Channel Add an Output Group Find the System Key in VT3000 Core Software Find the Location of all VersaCall Databases Turn Debug Mode On/Off in VT3000 Core Software Control Center Location & Text to Voice Settings Location for the Coordinator Settings & Driver Setup Location for the Paging Transmitter Settings & Driver Setup Location for the 2-Way Radio Settings & Driver Setup Location for the Phone Modem Settings Location & Setup for the SMTP Email Server

---

---