Category:Device Status
Jump to navigation
Jump to search
- Device Status is part of the VT3000 Core Software accessible under Diagnostics.
- The information contained here is related to the Mesh Network.
- This is the system that communicates will all your hardware devices.
- Device Status provides access to the following information:
- Status of the hardware modules related to the Mesh signal. Find out if the device is communicating with the system.
- Product provides the type of Device (Call Station, BSC, TIM, PSM, Coordinator or IO). The firmware version is also shown here.
- Name provides the current device configuration that is programmed on the device.
- Network provides the name of the Coordinator network name. If you have multiple Coordinators you would see multiple Network names.
- Address provides the mesh address of the device.
- Last Heard From provides the amount of time that has elapsed since the device checked in with the system.
- Status provides icons indicating different states.
- Details allows you to access the following - Basic Information, File Transfer Status, Coverage Test Status & Component Version.
- Options allows you to access the following - Configuration, Firmware Version, Firmware Updates & Module Commands.
Keyword Search
Type Subject or Key Word to Query Archives |
---|
Pages in category "Device Status"
The following 10 pages are in this category, out of 10 total.
V
- VT3000 - Change Device ISO Code - Micro SD Card - BSC, TIM, PSM
- VT3000 - Change Device ISO Code - Touch Screen - BSC, TIM, PSM
- VT3000 - Change Device ISO Code - VT3000 Software - BSC, TIM, PSM
- VT3000 - Change ISO Code - Call Station - Use Buttons
- VT3000 - Change ISO Code - Call Station - Use Micro SD Card
- VT3000 - Change ISO Code - Call Station - Wirelessly
- VT3000 - Device Status
- VT3000 - Update Configuration - Battery Call Station
- VT3000 - Update Configuration - Powered Call Station
- VT3000 - Update Configuration - TIM, PSM, BSC