VT3000 - Change Device ISO Code - Touch Screen - BSC, TIM, PSM

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
An Isolation Code is the specific channel used with a coordinator. Different Isolation Codes are required for facilities with multiple coordinators. New devices are shipped with a default Isolation Code of 1. There are multiple methods available to change the ISO code. This guide will explain how to change the ISO Code on a BSC, TIM or BSC using the Touch Screen. If you have a Call Station, please go to the Categories - Call Station page for instructions.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. At least one Coordinator setup, powered and communicating with the VT3000 Core Software.
3. At least one BSC, TIM or PSM powered & communicating with the system.



VideoHeader.png

Video



InstructionHeader.png

Step 1.
Ensure the Touch Screen & IO Module are plugged in and powered.
Bscin4.png



Step 2.
Ensure the Bluetooth signal from the Touch Screen is active/connected.
Bscin6.png
Bscin7.png



Step 3.
Select the 3 dots in the top right corner of the Touch Screen next to the Time display.
3215 9.png



Step 4.
Enter “7047” on the Pin Entry keypad – select OK.
3215 10.png



Step 5.
Select Settings on the Touch Screen menu.
3188 6.png



Step 6.
Scroll down the menu until you get to the Mesh heading - locate Isolation Code - select the Get button on the right side.
3215 11.png



Step 7.
The current Isolation Code will populate in the field - select the Change button.
3215 12.png



Step 8.
Enter the Isolation Code number that you want to switch to – select the Set button.
3215 13.png



Step 9.
Device will refresh and show the new ISO Code. Exit the Settings on the Touch Screen by selecting the Back button at the bottom of the screen.
ISOSet.png



Step 10.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Diagnostics – select Device Status.
3215 2.png
3215 3.png
Diagnostics Device Status



Step 11.
Find the device that you switched the ISO Code on - under the Network Name, ensure it is showing the correct name of the Coordinator.
StatusDevice.png



RelatedHowTos.png
Select a Guide Here
Change the ISO Code using the Micro SD Card - BSC TIM PSM
Change the ISO Code using the VT3000 Software - BSC TIM PSM
Change the ISO Code on a Call Station using the Alarm buttons
Change the ISO Code on a Call Station using the Micro SD Card
Change the ISO Code on a Call Station using the VT3000 Software
Update the Configuration on a Battery Power Call Station
Update the Configuration on a Powered Call Station
Update the Configuration on a BSC TIM PSM
Device Status Overview



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Change_Device_ISO_Code_-_Touch_Screen_-_BSC,_TIM,_PSM&oldid=9392"