VT3000 - Change Device ISO Code - VT3000 Software - BSC, TIM, PSM

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
An Isolation Code is the specific channel used with a coordinator. Different Isolation Codes are required for facilities with multiple coordinators. New devices are shipped with a default Isolation Code of 1. This method will work for BSC, TIM or PSM I/O Module, Switch Contact Module or Wireless Controls Module. If you have a Call Station, please use one of the ISO Code methods found on the Categories - Call Station page.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. At least one Coordinator setup, powered and communicating with the VT3000 Core Software.
3. At least one Switch Contact, Wireless Controls Module, BSC, TIM or PSM powered & communicating with the system.



VideoHeader.png

Video



InstructionHeader.png

Step 1.
Ensure the Touch Screen & IO Module are plugged in and powered.
Bscin4.png



Step 2.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Diagnostics – select Device Status.
3215 2.png
3215 3.png
Diagnostics Device Status



Step 3.
The device MUST show on Device Status - use the Mesh Address to identify it - select the Options link on the right side of the page/row.
3215 4.png



Step 4.
Select Commands.
3215 5.png



Step 5.
Select the down arrow in Command field.
3215 6.png



Step 6.
Select Set Isolation Code from the menu.
3215 7.png



Step 7.
Enter the Isolation Code you want to switch to – select the Issue Command button.
3215 8.png



Step 8.
Select Diagnostics – select Device Status.
3215 2.png
3215 3.png
Diagnostics Device Status



Step 9.
Find the device that you switched the ISO Code on - under the Network Name, ensure it is showing the correct name of the Coordinator.
StatusDevice.png



RelatedHowTos.png
Select a Guide Here
Change the ISO Code using the Micro SD Card - BSC TIM PSM
Change the ISO Code using the Touch Screen - BSC TIM PSM
Change the ISO Code on a Call Station using the Alarm buttons
Change the ISO Code on a Call Station using the Micro SD Card
Change the ISO Code on a Call Station using the VT3000 Software
Update the Configuration on a Battery Power Call Station
Update the Configuration on a Powered Call Station
Update the Configuration on a BSC TIM PSM
Device Status Overview



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Change_Device_ISO_Code_-_VT3000_Software_-_BSC,_TIM,_PSM&oldid=10363"