VT3000 - Change Device ISO Code - Micro SD Card - BSC, TIM, PSM

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
An Isolation Code is the specific channel used with a coordinator. Different Isolation Codes are required for facilities with multiple coordinators. New devices are shipped with a default Isolation Code of 1. This method will work for BSC, TIM or PSM I/O Module, Switch Contact Module or Wireless Controls Module. If you have a Call Station, please use one of the ISO Code methods found on the Categories - Call Station Page.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. At least one Coordinator setup, powered and communicating with the VT3000 Core Software.
3. At least one BSC, TIM or PSM powered & communicating with the system.
4. A Micro SD Card Reader attached to a computer you can use for this guide.



VideoHeader.png

Video



InstructionHeader.png

Step 1.
Unplug power from the BSC, TIM or PSM IO module.
Trans13.png



Step 2.
Loosen the screws on the front of the module until they spin freely.
ISO102.png



Step 3.
On the I/O board – locate the Micro SD card holder in the top right corner.
IO-board.gif



Step 4.
Remove the micro SD card - push up on the metal sleeve then let it fall back. When you push up the sleeve there will be a click when it is unlocked. NOTE: do this step with care. If the sleeve is damaged the entire I/O module will need to be replaced.
3143 5.png
3143 6.png



Step 5.
Insert the Micro SD card into a reader attached to the computer.
SD-Reader.png



Step 6.
Open Windows Notepad on your computer.
3215 16.png



Step 7.
Notepad will automatically open to a new untitled file. Type the Isolation Code number in the first space on the document - DO NOT type anything else.
3215 19.png



Step 8.
Select File - select Save - enter ISOCODE.txt in File Name field.
3215 20.png
3215 21.png



Step 9.
Navigate to the ISOCODE.txt file location - right click on the file - select Copy.
3215 26.png



Step 10.
Navigate to the SD Card via the reader attached to your computer - generally shows as a drive on your computer - double click on the drive to open - right click in the open file - select Paste.
SDCard.png
3215 27.png



Step 11.
The ISOCODE.txt file will now show as a file on the SD Card - remove the SD Card from the reader.
ISOTextFile.png
3143 6.png



Step 12.
Slide the SD Card back into the SD Card Holder on the IO board (metal sleeve). The text on the SD Card has to be facing away from the board. Push the sleeve gently down on to the board and slide the sleeve down to lock in place. You will feel a click when seated properly.
IO-board.gif



Step 13.
Replace the IO cover - tighten the 4 screws to secure the cover.
ISO102.png



Step 14.
Plug in the power for the IO module
Bscin25.png



Step 15.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Diagnostics – select Device Status.
3215 2.png
3215 3.png
Diagnostics Device Status



Step 16.
Find the device that you switched the ISO Code on - under the Network Name, ensure it is showing the correct name of the Coordinator.
StatusDevice.png



RelatedHowTos.png
Select a Guide Here
Change the ISO Code using the Touch Screen - BSC TIM PSM
Change the ISO Code using the VT3000 Software - BSC TIM PSM
Change the ISO Code on a Call Station using the Alarm buttons
Change the ISO Code on a Call Station using the Micro SD Card
Change the ISO Code on a Call Station using the VT3000 Software
Update the Configuration on a Battery Power Call Station
Update the Configuration on a Powered Call Station
Update the Configuration on a BSC TIM PSM
Device Status Overview



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Change_Device_ISO_Code_-_Micro_SD_Card_-_BSC,_TIM,_PSM&oldid=9322"