Difference between revisions of "VT3000 - Update Firmware - Powered Call Station - Wireless"
Jump to navigation
Jump to search
SupportAdmin (talk | contribs) |
SupportAdmin (talk | contribs) |
||
Line 1: | Line 1: | ||
=Overview | {|style="margin:left;" | ||
Firmware updates are included with Software Updates. This guide explains how to update a Powered Call Station Firmware using Wireless Mesh infrastructure. '''NOTE:''' The file transfer will take about 10 minutes to upload to the call station. Keeping this in mind, only update 1 call station at a time. If multiple units are selected, the transmission times will increase and there is a higher risk of file corruption. The best practice is to perform the update during slow times to take strain off the Mesh infrastructure during the normal work day. | |valign="top" | | ||
{|class="wikitable" style="background:#eaf3ff;" | |||
|- | |||
=Requirements | !style="text-align: left;"|<big>'''Overview'''</big> | ||
|- | |||
'''1.''' VT3000 Core Software installed and running on your system. | |Firmware updates are included with Software Updates. This guide explains how to update a Powered Call Station Firmware using Wireless Mesh infrastructure. '''NOTE:''' The file transfer will take about 10 minutes to upload to the call station. Keeping this in mind, only update 1 call station at a time. If multiple units are selected, the transmission times will increase and there is a higher risk of file corruption. The best practice is to perform the update during slow times to take strain off the Mesh infrastructure during the normal work day. | ||
|} | |||
'''2.''' | |} | ||
{|style="margin:left;" | |||
'''3.''' | |valign="top" | | ||
{|class="wikitable mw-collapsible mw-collapsed" style="background:#eaf3ff; width: 800px;" | |||
!style="text-align: left;"|<big>'''Requirements'''</big> | |||
|- | |||
|'''1.''' The VT3000 Core Software installed and running on your system. | |||
|- | |||
|'''2.''' A Coordinator must be setup, powered and communicating with the VT3000 Core Software. | |||
|- | |||
|'''3.''' At least one Powered Call Station communicating with the system. | |||
|} | |||
|} | |||
=Instructions= | =Instructions= |
Revision as of 16:49, 7 September 2021
|
|
Instructions
1. Open the VT3000 web interface – log in – select Diagnostics – select Device Status.
2. Find the Call Station with a green update icon - select Options for the Call Station.
3. Select Firmware.
4. Select Update Firmware button.
5. A warning screen will show - select OK.
6. Select Return to Device Status button.
7. Monitor the transfer - select Details for the Call Station being updated.
8. Select File Transfers.
9. The transfer data is shown with file size, percentage complete and other information - select Return to Device Status when transfer is complete.
10. The Call Station will reboot and beep for a few seconds. The Call Station will now show on the Device Status page without the green update icon.