VT3000 - Change Device ISO Code - Touch Screen - BSC, TIM, PSM
Revision as of 15:14, 7 September 2021 by SupportAdmin (talk | contribs)
|
|
Instructions
1. Plug in Power for I/O Module & Touch Screen.
2. Ensure Bluetooth connection is active - select the 3 squares (top right corner).
3. Enter “7047” on the keypad – select OK.
4. Select Settings.
5. Scroll down to the Mesh heading - locate Isolation Code option - select Get button.
6. Current Isolation Code will populate - select Change button.
7. Enter Isolation Code – select Set.
8. Device will refresh and show the new ISO Code - exit the Settings on the Touch Screen (select the Back button at the bottom of the screen).
9. Open the VT3000 web interface – log in – select Diagnostics – select Device Status.
10. Ensure the TIM, BSC or PSM is showing with the correct Network Name