VT3000 - Update Firmware - Powered Call Station - Wireless
Revision as of 16:49, 7 September 2021 by SupportAdmin (talk | contribs)
|
|
Instructions
1. Open the VT3000 web interface – log in – select Diagnostics – select Device Status.
2. Find the Call Station with a green update icon - select Options for the Call Station.
3. Select Firmware.
4. Select Update Firmware button.
5. A warning screen will show - select OK.
6. Select Return to Device Status button.
7. Monitor the transfer - select Details for the Call Station being updated.
8. Select File Transfers.
9. The transfer data is shown with file size, percentage complete and other information - select Return to Device Status when transfer is complete.
10. The Call Station will reboot and beep for a few seconds. The Call Station will now show on the Device Status page without the green update icon.