Call Support at 858-677-6766 ext. 210
Call Stations are hardware modules that have 4 fixed buttons.
|
These buttons can be configured as Alarms inside the VT3000 Core Software.
|
Alarms can be setup as Dual State or Tri-State. Buttons can be disabled if not being used.
|
This device is available as Powered (110vac) or Battery Powered (C Cell).
|
|
|
|
Powered Call Station
|
Requirements
|
Mounting location free of metal enclosers.
|
110v power outlets within 6 feet of placement/location
|
Mounting location within 100’ of the Computer/Server, Repeater or Other Device.
|
Ensure the device is mounted in an easily accessible location.
|
Specifications
|
Dimensions - 5” (W) x 7” (L) x 2.5” (H)
|
(1) 6’ Power Cord attached
|
|
|
|
Battery Powered Call Station
|
Requirements
|
Mounting location free of metal enclosers.
|
Mounting location within 100’ of the Computer/Server, Repeater or Other Device.
|
Ensure the device is mounted in an easily accessible location.
|
Specifications
|
Dimensions - 5” (W) x 7” (L) x 2.5” (H)
|
Requires (2) C Batteries (included)
|
|
|
|
Select the appropriate link below for Instructions on Installation
|
Select the appropriate link below for a How To Guide
|