Difference between revisions of "VT3000 - Setup Attached Light Stack - Call Station"

From Versacall Support
Jump to navigation Jump to search
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Overview=
{|style="background:transparent; color:black" border="0" height="230" align="center" valign="bottom"
This guide explains how to setup wired lights that are attached to the device. If you are trying to setup a wireless light module please see [[VT3000 - Add Wireless Light Module]]. The example shown in the guide is for a 5 color light stack attached to a Call Station. Color stack light order is Green at the top then Red, Amber, Blue and White. Green is wired to O5, Red to O1, Amber to O2, Blue to O3 and White to O4. This wired setup is the same on an IO module for a PSM or TIM. The instructions below will also be the same for any alarms setup on a PSM or TIM.
|+style="background:transparent|
 
|-align="center"
=Requirements=
|
 
|[[Image:CallUsBtn.png|Call Now 858-677-6766]]
    '''1.''' Call Station, TIM or PSM with a light stack attached and wired to the device (IO module for TIM or PSM).
|
 
|[[Image:SubmitTckBtn.png|link=https://www.versacall.com/customer-support/service-ticket]]
 
|
=Instructions - Discrete Output Setup=
|[[Image:EmailUsBtn.png|link=mailto:support@versacall.com?Subject=Help%20Needed%20Wiki&body=Type%20Message%20Here]]
 
|}
'''1.''' Open the VT3000 web interface – log in – select Configuration – select Devices.
<br>
 
----
<gallery widths=93 heights=93>
----
File:3137_1.png|Configuration
<br>
File:3137_2.png|Devices
[[File:GeneralHeader.png]]
</gallery>
<br>
 
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
 
|-
'''2.''' Select the Call Station from the list – select Edit.
|<big>'''Overview'''</big>
 
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
<gallery widths=318 heights=407>
|valign="top" |
File:3137_3.png
|-
</gallery>
|This guide explains how to setup the output connections to control a light stack that is attached/wired to a Call station. The example shown in the guide is for a 5 color light stack attached to a Call Station. Regardless of how many lights you have in your stack, the instructions will be exactly the same.
 
|}
 
|}
'''3.''' Select the Discrete Outputs tab.
<br>
 
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
<gallery widths=474 heights=89>
|-
File:3137_4.png
|<big>'''Requirements'''</big>
</gallery>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
 
|valign="top" |
 
{| class="wikitable mw-collapsible mw-collapsed" width="775px;"
'''4.''' Select Discrete Output 1.
|-
 
|style="text-align: center;" | '''See Requirements Here'''
<gallery widths=195 heights=168>
|-
File:3137_5.png
|'''1.''' The VT3000 Core Software installed and running on your system.
</gallery>
|-
<gallery widths=216 heights=166>
|'''2.'''  A Coordinator must be setup, powered and communicating with the VT3000 Core Software.
File:3137_6.png
|-
</gallery>
|'''3.''' A Powered Call Station w/Light Stack attached communicating with the VT3000 Software.
 
|-
 
|'''4.'''  A Call Station Configuration setup in the VT3000 Software.
'''5.''' Discrete Output Properties:
|}
 
|}
<gallery widths=352 heights=320>
|}
File:3137_7.png
<br>
</gallery>
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
<gallery widths=418 heights=263>
|-
File:3137_8.png
|<big>'''Completion Steps'''</big>
</gallery>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
 
|valign="top" |
 
|-
    '''a. Description''' – enter a name for the output – light color.
||[[File:LightPart1.png|250px|link=VT3000 - Attach/Wire a Light Stack to a Call Station]] || [[File:LightPart2A.png|250px|]] || [[File:LightPart3.png|250px|link=VT3000 - Control/Use Attached Light Stack - Call Station]]
    '''b. Type''' – 3 options:
|}
          '''i. Normal''' – output will turn on/off when commanded.
|}
          '''ii. Disabled''' – output will not turn on/off.
<br>
          '''iii. Related''' – output will turn on/off when another output is on/off.
----
    '''c. Inverted''' – output will do the opposite of normal.
----
    '''d. On Delay''' – number of milliseconds to elapse before the output turns on.
<br>
    '''e. Off Delay''' – number of milliseconds to elapse before the output turns off.
[[File:InstructionHeader.png]]
    '''f. Blink On''' – number of milliseconds to stay on during blink.
<br>
    '''g. Blink Off''' – number or milliseconds to stay off during blink.
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
    '''h. Direct''' – available when Related Type is selected. Not applicable.
|-
    '''i. Inverse''' – available when Related Type is selected. Explained in Step 8.
|<big>'''Step 1.'''</big>
 
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
 
|valign="top" |
'''6.''' Example - all lights excluding Green:
|-
 
|Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices.
<gallery widths=347 heights=319>
{|style="margin:left;"
File:3141_10.png
|valign="top" |
</gallery>
{|class="wikitable" style="background:white; align:center;"
<gallery widths=348 heights=315>
|-
File:3141_11.png
|[[File:3137_1.png|center|93px]] || [[File:3137_2.png|center|93px]]
</gallery>
|-
<gallery widths=350 heights=314>
|style="text-align:center" | '''Configuration''' ||style="text-align:center" | '''Devices'''
File:3141_12.png
|}
</gallery>
|}
<gallery widths=346 heights=315>
|}
File:3141_13.png
|}
</gallery>
<br>
 
----
    '''a. Description''' – enter the light color.
<br>
    '''b. Type''' – leave this as normal.
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
    '''c. Inverted''' – leave this unchecked.
|-
    '''d. Default State''' – select Off.
|<big>'''Step 2.'''</big>  
    '''e. On Delay''' – enter Zero.
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
    '''f. Off Delay''' – enter Zero.
|valign="top" |
    '''g. Blink On''' – enter 5.
|-
    '''h. Blink Off''' – enter 5.
|Select the Configuration of the Call Station with a Light Stack attached from the list – select Edit.
 
{|style="margin:left;"
 
|valign="top" |
'''7.''' Example - Green light only:
{|class="wikitable" style="background:white;"
 
|-
<gallery widths=525 heights=257>
|[[File:3137_3.png|center|318px]]
File:3141_14.png
|}
</gallery>
|}
 
|}
    '''a. Description''' – enter Green Light.
|}
    '''b. Type''' – select Related.
<br>
    '''c. Inverted''' – leave this unchecked.
----
    '''d. On Delay''' – leave this set to zero.
<br>
    '''e. Off Delay''' – leave this set to zero.
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
    '''f. Direct''' – leave all unchecked.
|-
    '''g. Inverse''' – mark DO1, DO2, DO3 and DO4.
|<big>'''Step 3.'''</big>
 
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
'''10.''' Select Save & Exit.
|valign="top" |
 
|-
<gallery widths=252 heights=76>
|Select the Discrete Outputs tab.
File:3141_15.png
{|style="margin:left;"
</gallery>
|valign="top" |
 
{|class="wikitable" style="background:white;"
 
|-
=Instructions - Setting Up Actions=
|[[File:3137_4.png|center|474px]]
 
|}
'''1.''' Select a Call Station with lights attached & set up – select Edit.
|}
 
|}
<gallery widths=318 heights=407>
|}
File:3137_15.png
<br>
</gallery>
----
 
<br>
 
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
'''2.''' Select the Monitoring Points tab.
|-
 
|<big>'''Step 4.'''</big>
<gallery widths=452 heights=85>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
File:3137_16.png
|valign="top" |
</gallery>
|-
 
|Select Discrete Output 1.
 
{|style="margin:left;"
'''3.''' Select the first alarm/button so that it is highlighted.
|valign="top" |
 
{|class="wikitable" style="background:white;"
<gallery widths=158 heights=126>
|-
File:3137_17.png
|[[File:3137_6.png|center|216px]]
</gallery>
|}
<gallery widths=169 heights=124>
|}
File:3137_18.png|border]]
|}
</gallery>
|}
 
<br>
 
----
'''4.''' Select the Actions tab.
<br>
 
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
<gallery widths=364 heights=64>
|-
File:3137_19.png
|<big>'''Step 5.'''</big>  
</gallery>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
 
|valign="top" |
 
|-
'''5.''' By default, a Call Station will have actions created:
|Discrete Output Properties
 
{|style="margin:left;"
<gallery widths=311 heights=160>
|valign="top" |
File:3137_20.png
{|class="wikitable" style="background:white; align:center; width:775px;"
</gallery>
|-
 
|[[File:3137_7.png|border|center|352px]]
 
|}
    '''a. Set – Blink Red Light''' – on Set output 1/Red will blink.
{|class="wikitable" style="background:white; align:center; width:775px;"
    '''b. Acknowledge – Turn on Red Light''' – on Acknowledge output 1/Red will turn on.
|-
    '''c. Clear – Turn off Red Light''' – on Clear output 1/Red will turn off.
|'''Description''' – enter a name for the output – light color.
 
|-
'''6.''' Action Properties - this window will show when selecting to add or edit an action.
|'''Type''' – Normal – output will turn on/off when commanded.
 
|-
<gallery widths=390 heights=211>
|'''Inverted''' – output will do the opposite of normal.
File:3137_21.png
|-
</gallery>
|'''Default State''' - what behavior the output will perform when it has no command.
 
|-
    '''a. State''' – select state of the alarm Set, Acknowledge or Clear to initiate the action.
|'''On Delay''' – number of milliseconds to elapse before the output turns on.
    '''b. Type''' – 5 options.
|-
          '''i. Modify Discrete Output''' – select an output on the device being configured.
|''' Off Delay''' – number of milliseconds to elapse before the output turns off.
          '''ii. Modify Discrete Output on Another Device''' – select an output on a device other than the one being configured.
|-
          '''iii. Modify Discrete Input''' - enable or disable an input on the device.
|'''Blink On''' – number of milliseconds to stay on during blink.
          '''iv. Execute Task''' - used in custom configurations.
|-
          '''v. Run Trigger''' - used in custom configurations.
|'''Blink Off''' – number or milliseconds to stay off during blink.
    '''c. Action''' – select Turn On, Blink or Turn Off.
|}
    '''d. Output''' – select the output/light for the action.
|}
 
|}
 
|}
'''7.''' Select Save & Exit.
<br>
 
----
<gallery widths=249 heights=88>
<br>
File:3137_14.png
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
</gallery>
|-
 
|<big>'''Step 6.'''</big>
 
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
=Step by Step Guides=
|valign="top" |
 
|-
[[VT3000_-_Use_Lights_on_Wireless_Device|How to Use/Trigger Wireless Lights]]
|Setup Discrete Output 1 as the Red Light. This is done because the Red Light is wired into O1 on the Call Station.
 
{|style="margin:left;"
[[VT3000_-_Add_Wireless_Light_Module|Add a Wireless Light Module to the System]]
|valign="top" |
 
{|class="wikitable" style="background:white; align:center; width:775px;"
[[VT3000_-_Install_Light_Stack_-_Wiring|How to Install a Wireless Light Stack]]
|-
 
|[[File:3141_10.png|border|center|350px]]
 
|}
=Having Trouble?=
{|class="wikitable" style="background:white; align:center; width:775px;"
 
|-
<gallery widths=150px>
|'''Description''' – enter Red Light.
File:ticketicon.png|Submit a Service Ticket|link=https://www.versacall.com/customer-support/service-ticket/
|-
</gallery>
|'''Type''' – leave this as normal.
|-
|'''Inverted''' – leave this unchecked.
|-
|'''Default State''' – select Off.
|-
|'''On Delay''' – leave this as Zero.
|-
|'''Off Delay''' – leave this as Zero.
|-
|'''Blink On''' – leave this as 5.
|-
|'''Blink Off''' – leave this as 5.
|}
|}
|}
|}
<br>
----
<br>
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
|-
|<big>'''Step 7.'''</big>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
|valign="top" |
|-
|Setup the other lights in the exact same manner - only the Output Description will change. Examples of each light setup is shown below. Please use the Exact same order that we have shown below as this will match up with the way your Call Station has been wired.
{|style="margin:left;"
|valign="top" |
{|class="wikitable" style="background:white; align:center;"
|-
|[[File:3141_11.png|border|center|350px]] || |[[File:3141_12.png|border|center|350px]]
|}
{|class="wikitable" style="background:white; align:center;;"
|-
|[[File:3141_13.png|border|center|350px]]
|}
|}
|}
|}
<br>
----
<br>
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
|-
|<big>'''Step 8.'''</big>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
|valign="top" |
|-
|The Green light is setup to do the opposite of each of the other lights. For this reason, the Green light configuration is setup differently - we use a Related Type. The image below shows the options available for a Related Type:
{|style="margin:left;"
|valign="top" |
{|class="wikitable" style="background:white; align:center; width:775px;"
|-
|[[File:3137_8.png|border|center|418px]]
|}
{|class="wikitable" style="background:white; align:center; width:775px;"
|-
|'''Description''' – enter a name for the output – light color.
|-
|'''Type''' – Related – output will turn on/off when another selected output is on/off.
|-
|'''Inverted''' – output will do the opposite of normal.
|-
|'''On Delay''' – number of milliseconds to elapse before the output turns on.
|-
|'''Off Delay''' – number of milliseconds to elapse before the output turns off.
|-
|'''Direct''' – output will do the exact same behavior as another selected output.
|-
|'''Inverse''' – output will do the opposite behavior as another selected output.
|}
|}
|}
|}
<br>
----
<br>
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
|-
|<big>'''Step 9.'''</big>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
|valign="top" |
|-
|Discrete Output 5 Properties;
{|style="margin:left;"
|valign="top" |
{|class="wikitable" style="background:white; align:center; width:775px;"
|-
|[[File:3141_14.png|border|center|425px]]
|}
{|class="wikitable" style="background:white; align:center; width:775px;"
|-
|'''Description''' – enter Green Light.
|-
|'''Type''' – select Related.
|-
|'''Inverted''' – leave this unchecked.
|-
|'''On Delay''' – leave this as zero.
|-
|'''Off Delay''' – leave this as zero.
|-
|'''Direct''' – leave these all unchecked.
|-
|'''Inverse''' – check mark DO1, DO2, DO3 and DO4. This tells the Green light to do the opposite of the other lights.
|}
|}
|}
|}
<br>
----
<br>
{|style="margin:left; width: 100px; background:#eaf3ff; padding:5px; border:2px solid #000000;"
|-
|<big>'''Step 10.'''</big>
{|style="margin:left; width: 800px; background:#F0F0F0; padding:5px; border:2px solid #000000;"
|valign="top" |
|-
|Select Save & Exit to save the setup - proceed to Step 3.
{|style="margin:left;"
|valign="top" |
{|class="wikitable" style="background:white; align:center;"
|-
|[[File:3141_15.png|center|252px]]
|}
|}
|}
|}
<br>
----
----
<br>
{|style="margin:auto;"
|+
[[File:RelatedHowTos.png|center]]
|align="center" |
{| class="wikitable mw-collapsible mw-collapsed" width="400px;"
|-
|style="text-align: center;" | '''Select a Guide Here'''
|-
|[[VT3000 - Install Call Station - Battery|Installation Instructions for a Battery Call Station]]
|-
|[[VT3000 - Install Call Station - Powered|Installation Instructions for a Powered Call Station]]
|-
|[[VT3000 - Add Call Station Configuration|Add a Call Station Configuration]]
|-
|[[VT3000 - Update Configuration - Battery Call Station|Update the Configuration on a Battery Call Station]]
|-
|[[VT3000 - Update Configuration - Powered Call Station|Update the Configuration on a Powered Call Station]]
|-
|[[VT3000 - Update Firmware - Battery Call Station - Wireless|Update the Firmware on a Battery Call Station - Wireless]]
|-
|[[VT3000 - Update Firmware - Powered Call Station - Wireless|Update the Firmware on a Powered Call Station - Wireless]]
|-
|[[VT3000 - Update Firmware - Call Station - Manually|Update the Firmware on a Call Station - Manually]]
|-
|[[VT3000 - Attach/Wire a Light Stack to a Call Station|Install/Attach a Stack Light to a Call Station]]
|-
|[[VT3000 - Control/Use Attached Light Stack - Call Station|Setup the Use of the Light(s) on the Call Station Configuration]]
|-
|[[VT3000 - Change ISO Code - Call Station - Use Buttons|Change ISO Code on a Call Station using the # 1 - # 4 Buttons]]
|-
|[[VT3000 - Change ISO Code - Call Station - Use Micro SD Card|Change ISO Code on a Call Station using the Micro SD Card]]
|-
|[[VT3000 - Change ISO Code - Call Station - Wirelessly|Change ISO Code on a Call Station using VT3000 Core Software Wirelessly]]
|-
|[[VT3000 - Test Signal Strength - Coverage Test - Powered Call Station|Perform a Coverage Test on a Powered Call Station]]
|-
||[[VT3000 - Test Signal Strength - Coverage Test - Battery Powered Call Station|Perform a Coverage Test on a Battery Powered Call Station]]
|}
|}
<br>
----
<br>
{|style="margin:auto;"
|+
[[File:SearchHeader.png|center]]
|align="center" |
{|class="wikitable"
|-
|<inputbox>type=search</inputbox>
|}
|}
<br>
----
<br>
[[File:VC Footer.png|center]]
{|style="background:transparent; color:black" border="0" height="200" align="center" valign="bottom" cellpadding=10px cellspacing=10px
|+style="background:transparent|
|-align="center"
|
|[[File:LinkedIn.png|Follow Us On LinkedIn|link=https://www.linkedin.com/company/versacall/]]
|
|[[File:BlogIcon.png|View our Blog|link=https://www.versacall.com/blog/]]
|}
<br>
[[Category:VT3000 Core Software]]
[[Category:Device Hardware]]
[[Category:Call Station]]
[[Category:Light Stack]]

Latest revision as of 15:29, 2 January 2024

Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
This guide explains how to setup the output connections to control a light stack that is attached/wired to a Call station. The example shown in the guide is for a 5 color light stack attached to a Call Station. Regardless of how many lights you have in your stack, the instructions will be exactly the same.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software.
3. A Powered Call Station w/Light Stack attached communicating with the VT3000 Software.
4. A Call Station Configuration setup in the VT3000 Software.


Completion Steps
LightPart1.png LightPart2A.png LightPart3.png



InstructionHeader.png

Step 1.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices.
3137 1.png
3137 2.png
Configuration Devices



Step 2.
Select the Configuration of the Call Station with a Light Stack attached from the list – select Edit.
3137 3.png



Step 3.
Select the Discrete Outputs tab.
3137 4.png



Step 4.
Select Discrete Output 1.
3137 6.png



Step 5.
Discrete Output Properties
3137 7.png
Description – enter a name for the output – light color.
Type – Normal – output will turn on/off when commanded.
Inverted – output will do the opposite of normal.
Default State - what behavior the output will perform when it has no command.
On Delay – number of milliseconds to elapse before the output turns on.
Off Delay – number of milliseconds to elapse before the output turns off.
Blink On – number of milliseconds to stay on during blink.
Blink Off – number or milliseconds to stay off during blink.



Step 6.
Setup Discrete Output 1 as the Red Light. This is done because the Red Light is wired into O1 on the Call Station.
3141 10.png
Description – enter Red Light.
Type – leave this as normal.
Inverted – leave this unchecked.
Default State – select Off.
On Delay – leave this as Zero.
Off Delay – leave this as Zero.
Blink On – leave this as 5.
Blink Off – leave this as 5.



Step 7.
Setup the other lights in the exact same manner - only the Output Description will change. Examples of each light setup is shown below. Please use the Exact same order that we have shown below as this will match up with the way your Call Station has been wired.
3141 11.png
3141 12.png
3141 13.png



Step 8.
The Green light is setup to do the opposite of each of the other lights. For this reason, the Green light configuration is setup differently - we use a Related Type. The image below shows the options available for a Related Type:
3137 8.png
Description – enter a name for the output – light color.
Type – Related – output will turn on/off when another selected output is on/off.
Inverted – output will do the opposite of normal.
On Delay – number of milliseconds to elapse before the output turns on.
Off Delay – number of milliseconds to elapse before the output turns off.
Direct – output will do the exact same behavior as another selected output.
Inverse – output will do the opposite behavior as another selected output.



Step 9.
Discrete Output 5 Properties;
3141 14.png
Description – enter Green Light.
Type – select Related.
Inverted – leave this unchecked.
On Delay – leave this as zero.
Off Delay – leave this as zero.
Direct – leave these all unchecked.
Inverse – check mark DO1, DO2, DO3 and DO4. This tells the Green light to do the opposite of the other lights.



Step 10.
Select Save & Exit to save the setup - proceed to Step 3.
3141 15.png



RelatedHowTos.png
Select a Guide Here
Installation Instructions for a Battery Call Station
Installation Instructions for a Powered Call Station
Add a Call Station Configuration
Update the Configuration on a Battery Call Station
Update the Configuration on a Powered Call Station
Update the Firmware on a Battery Call Station - Wireless
Update the Firmware on a Powered Call Station - Wireless
Update the Firmware on a Call Station - Manually
Install/Attach a Stack Light to a Call Station
Setup the Use of the Light(s) on the Call Station Configuration
Change ISO Code on a Call Station using the # 1 - # 4 Buttons
Change ISO Code on a Call Station using the Micro SD Card
Change ISO Code on a Call Station using VT3000 Core Software Wirelessly
Perform a Coverage Test on a Powered Call Station
Perform a Coverage Test on a Battery Powered Call Station



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Setup_Attached_Light_Stack_-_Call_Station&oldid=10354"