VT3000 - Update Firmware - Battery Call Station - Wireless

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
Firmware updates are included with Software Updates. This guide explains how to update a Battery Powered Call Station Firmware using Wireless Mesh infrastructure.
The file transfer will take about 10 minutes to upload to the call station. Keeping this in mind, only update 1 call station at a time. If multiple units are selected, the transmission times will increase and there is a higher risk of file corruption.
The best practice is to perform the update during slow times to take strain off the Mesh infrastructure during the normal work day.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software.
3. At least one Battery Powered Call Station communicating with the system.



InstructionHeader.png

Step 1.
The Call Station must be set into Program Mode to prevent the unit from going into sleep mode during the file transfer. Press and hold the Clear button (small white at the bottom) while pressing down the 1 button.
3135 1.png



Step 2.
The LED lights will all go solid for a few seconds - this means the unit is in Program Mode.
3135 2.png



Step 3.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Diagnostics – select Device Status.
3135 3.png
3135 4.png
Diagnostics Device Status



Step 4.
The Call Station will show on the Device Status page in bold text with a green update icon. If the Call Station is not showing in bold text, repeat step 1. Select the Options link on the right side.
3135 5.png



Step 5.
Select Firmware.
3135 6.png



Step 6.
Select the Update Firmware button.
3135 7.png



Step 7.
A warning screen will show - select OK.
3135 8.png



Step 8.
Select the Return to Device Status button.
3135 9.png



Step 9.
You can monitor the file transfer - select the Details link on the right side.
3135 10.png



Step 10.
Select File Transfers.
3135 11.png



Step 11.
The transfer data is shown with file size, percentage complete and other information - select the Return to Device Status button when the transfer is complete.
3135 12.png



Step 12.
The Call Station will reboot and beep for a few seconds. The Call Station will now show on the Device Status page as normal, the green update icon will not longer show.
3135 13.png



RelatedHowTos.png
Select a Guide Here
Installation Instructions for a Battery Call Station
Installation Instructions for a Powered Call Station
Add a Call Station Configuration
Update the Configuration on a Battery Call Station
Update the Configuration on a Powered Call Station
Update the Firmware on a Powered Call Station - Wireless
Update the Firmware on a Call Station - Manually
Install/Attach a Stack Light to a Call Station
Configure/Setup Light Stack on the Call Station Configuration
Setup the Use of the Light(s) on the Call Station Configuration
Change ISO Code on a Call Station using the # 1 - # 4 Buttons
Change ISO Code on a Call Station using the Micro SD Card
Change ISO Code on a Call Station using VT3000 Core Software Wirelessly
Perform a Coverage Test on a Powered Call Station
Perform a Coverage Test on a Battery Powered Call Station



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Update_Firmware_-_Battery_Call_Station_-_Wireless&oldid=9570"