Difference between revisions of "Home - BSC"

Revision as of 17:43, 29 August 2022

A BSC is a hardware module that has a Touch Screen & I/O Module.

A BSC can be programmed inside the VT3000 Core Software.

Alarms can be setup as Mono State, Dual State, and Tri-State.

Alarms can accept Reason Codes on Set, Acknowledge or Clear.

A Manual Count button can be programmed. Allows an operator to select the button to indicate a piece is complete.

A Process button can be programmed. Allows an operator to select the button to indicate when work began and when it ended.

The Device can accept a total of 2 buttons. (1) Process & (1) Count or (2) Count buttons.

Select the appropriate link below for Instructions on Installation

Instructions on Installing a BSC I/O & Touch Screen
Instructions on Installing a Replacement Touch Screen
Instructions on Pairing an Existing Touch Screen

Select the appropriate link below for a How To Guide

Configuration - Alarms
Create/Add an Alarm
Create/Add an Alarm Label
Create/Add an Alarm with a Reason Code
Add Communications to an Alarm

Configuration - Process
Create/Add a Process
Create/Add an Alarm to a Process
Create/Add a Data Field to a Process

Configuration - Count
Create/Add a Manual Count Button

Configuration - Program/Update
Send a Configuration to a New/Not Configured BSC
Send an Updated Configuration to an Existing/Configured BSC

Configuration - Data Field
Create/Add a Key Input Data Field
Create/Add a Shared List Data Field
Create/Add a Static List Data Field

Attached Light Stack
Add/Attach a Light Stack to a BSC I/O Module
Setup/Configure an Attached Light Stack
Setup/Configure the use of an Attached Light Stack

ISO (Isolation) Code
Change the ISO (Isolation) Code using the Touch Screen
Change the ISO (Isolation) Code using the VT3000 Software - Wirelessly
Change the ISO (Isolation) Code using the Micro SD Card in the I/O Module - Manually

Signal Strength
Test the Signal Strength (Mesh Signal)
Test the Bluetooh Signal Strength (I/O to Touch Screen Connection)

Firmware
Update the Firmware on a Battery Powered Call Station - Wirelessly
Update the Firmware on a Powered (110vac) Call Station - Wirelessly
Update the Firmware on a Call Station using the Micro SD Card on the Device

@@ Line 1: / Line 1: @@
 [[File:GeneralHeader.png]]
 <br>
-A BSC is a hardware module that has a Touch Screen & I/O Module.
+::A BSC is a hardware module that has a Touch Screen & I/O Module.
-<br>
+::A BSC can be programmed inside the VT3000 Core Software.
-A BSC can be programmed inside the VT3000 Core Software.
+::Alarms can be setup as Mono State, Dual State, and Tri-State.
-<br>
+::Alarms can accept Reason Codes on Set, Acknowledge or Clear.
-Alarms can be setup as Mono State, Dual State, and Tri-State.
+::A Manual Count button can be programmed. Allows an operator to select the button to indicate a piece is complete.
-<br>
+::A Process button can be programmed. Allows an operator to select the button to indicate when work began and when it ended.
-Alarms can accept Reason Codes on Set, Acknowledge or Clear.
+::The Device can accept a total of 2 buttons. (1) Process & (1) Count or (2) Count buttons.
-<br>
-A Manual Count button can be programmed. Allows an operator to select the button to indicate a piece is complete.
-<br>
-A Process button can be programmed. Allows an operator to select the button to indicate when work began and when it ended.
-<br>
-The Device can accept a total of 2 buttons. (1) Process & (1) Count or (2) Count buttons.
 <br>
 {|style="background:transparent; color:black" border="0" height="230" align="left" valign="bottom" cellpadding=10px cellspacing=10px