Home - BSC
Revision as of 17:43, 29 August 2022 by SupportAdmin (talk | contribs)
- A BSC is a hardware module that has a Touch Screen & I/O Module.
- A BSC can be programmed inside the VT3000 Core Software.
- Alarms can be setup as Mono State, Dual State, and Tri-State.
- Alarms can accept Reason Codes on Set, Acknowledge or Clear.
- A Manual Count button can be programmed. Allows an operator to select the button to indicate a piece is complete.
- A Process button can be programmed. Allows an operator to select the button to indicate when work began and when it ended.
- The Device can accept a total of 2 buttons. (1) Process & (1) Count or (2) Count buttons.
Select the appropriate link below for Instructions on Installation
|
|