Call Support at 858-677-6766 ext. 210
A BSC is a hardware module that has a Touch Screen & I/O Module.
|
A BSC can be programmed inside the VT3000 Core Software.
|
Alarms can be setup as Mono State, Dual State, and Tri-State.
|
Alarms can accept Reason Codes on Set, Acknowledge or Clear.
|
A Manual Count button can be programmed. Allows an operator to select the button to indicate a piece is complete.
|
A Process button can be programmed. Allows an operator to select the button to indicate when work began and when it ended.
|
The Device can accept a total of 2 buttons. (1) Process & (1) Count or (2) Count buttons.
|
|
|
|
BSC Module
|
Requirements
|
I/O Mounting location free of metal enclosers.
|
(2) 110v power outlets within 6 feet of module placement/location.
|
Mounting location within 100’ of the Computer/Server, Repeater or Other Device.
|
Touch Screen mounting location free of metal enclosures & within 15 feet of IO Module.
|
Ensure the device is mounted in an easily accessible location.
|
Specifications
|
Dimensions - IO Module - 5” (W) x 7” (L) x 2.5” (H)
|
Dimensions - Touch Screen – 6.75” (W) x 10” (L) x – 1.25” Screen Thickness
|
(1) 6’ Power Cord attached (IO Module)
|
(1) 6’ Power Cord included (Touch Screen)
|
|
|
|
Select the appropriate link below for Instructions on Installation
|
Select the appropriate link below for a How To Guide
|