Home - BSC

General Information

• Consists of 2 components - a Touch Screen and an I/O Module
• Can be programmed using the VT3000 Core Software
• Alarms can be setup as Mono State, Dual State, or Tri-State
• Reasons Codes available on Set, Acknowledge, or Clear
• Accepts a Manual, on Screen, Count button
• Accepts a Process button - start and stop a process/procedure (Production, Job, etc.)
• Accepts a total of 2 manual buttons - 1 Process & 1 Count OR 2 Counts

Specifications

Requirements

• I/O Mounting location free of metal enclosers.
• (2) 110v power outlets within 6 feet of module placement/location.
• Mounting location within 100’ of the Computer/Server, Repeater or Other Device.
• Touch Screen mounting location free of metal enclosures & within 15 feet of IO Module.
• Ensure the device is mounted in an easily accessible location.

Specifications

• Dimensions - IO Module - 5” (W) x 7” (L) x 2.5” (H)
• Dimensions - Touch Screen – 6.75” (W) x 10” (L) x – 1.25” Screen Thickness
• (1) 6’ Power Cord attached (IO Module)
• (1) 6’ Power Cord included (Touch Screen)

Install Guides

Instructions on Installing an I/O & Touch Screen

Instructions on Installing a Replacement Touch Screen

Instructions on Pairing an Existing Touch Screen

Step by Step Guides

Alarms

Add an Alarm

Add an Alarm - Label

Add an Alarm - Reason Code

Add Communications to an Alarm

Process

|Add a Process

Add an Alarm to a Process

Add a Data Field to a Process

Count

Add a Manual Count Button

Data Field

Add a Key Input Data Field

Add a Shared List Data Field

Add a Static List Data Field

Device Configuration

Send a New Configuration

Send an Updated Configuration

Copy or Duplicate a Configuration

Light Stack Attachment

Attach a Physical Light Stack to an I/O Module

Setup & Configure an Attached Light Stack

Setup & Configure the use of an Attached Light Stack

Firware

BSC Firmware Update Home Page - Manual Method - Using Micro SD Card

Update IO Module Firmware Manually - Using the Micro SD Card

Update Touch Screen HMI Manually - No USB Port

Update Touch Screen HMI Manually - Using the USB Port

Update Firmware - I/O & HMI - Wirelessly

Signal Strength

Change Isolation Code (ISO) with the Touch Screen

Change Isolation Code (ISO) with the VT3000 Software - Wirelessly

Change Isolation Code (ISO) with the Micro SD Card - I/O Module - Manually

Isolation Code - ISO

Test the Signal Strength (Mesh Signal)

Test the Bluetooh Signal Strength (I/O to Touch Screen Connection)

Keyword Search

Type Subject or Key Word to Query Archives