Home - PSM

Call Support at 858-677-6766 ext. 210

---

The PSM can accept Alarms, Data Fields, Processes, Counts, Inputs & Indicators. Inputs from machines can be connected to the I/O Module. All buttons can be configured inside the VT3000 Core Software. Alarms can be setup as Dual State, Tri-State or Mono-State. Data Fields can be added to Alarms or Processes. The PSM has 2 components - an I/O Module & a Touch Screen.

---

---

Select the appropriate link below for Instructions on Installation Instructions on Installing a PSM I/O Module & Touch Screen Instructions on Installing a Replacement Touch Screen Instructions on Pairing/Re-Pairing an Existing Touch Screen

---

Select the appropriate link below for a How To Guide Configuration - Alarm Add an Alarm button to your PSM Add an Alarm with Reasons button to your PSM Add an Alarm Label button to your PSM Add Communications to your Alarm button Configuration - Data Field Add a Key Input Data Field Add a Static List Data Field Add a Shared List Data Field Configuration - Count Add a Count Button to your PSM Configuration - Process Add a Process (Start Production/Job) button to your PSM Add a Data Field to a Process Add an Alarm to a Process Add a Count (Wired Input) to a Process Enable or Disable an Input (I/O Module) using a Process Configuration - Module Send a Configuration to a New (Not Configured) PSM Update the Configuration on an Existing PSM Wired Input - Machine to PSM I/O Module Connecting a Wired Input from a Machine to the PSM I/O Module Setup a Wired Input as an Alarm Setup a Wired Input as a Count Configure a Wired Input (Alarm) as a Dual State Alarm Configure a Wired Input (Alarm) as a Tri-State Alarm Configure a Wired Input (Alarm) as a Tri-State Alarm w/Reason on Acknowledge Configure a Wired Input (Count) as a Continuous Count Attached Light Stack Add/Attach a Light Stack to a PSM I/O Module Setup/Configure and Attached Light Stack on a PSM Setup/Configure the use of an Attached Light Stack on a PSM ISO (Isolation) Code Change the ISO (Isolation) Code on a PSM using the Touch Screen Change the ISO (Isolation) Code on a PSM using the VT3000 Core Software - Wirelessly Change the ISO (Isolation) Code on a PSM using the Micro SD Card on the Device Signal Strength Test the Signal Strength (Mesh Signal) on a PSM Test the Bluetooth Signal Strength (Between I/O & Touch Screen) on a PSM Firmware Update the Firmware on a PSM (I/O & Touch Screen) - Wirelessly Update the Firmware on a PSM (I/O & Touch Screen) - Manually Update the Touch Screen Firmware on a PSM - USB Enabled Touch Screen Update the Touch Screen Firmware on a PSM - Non-USB Enabled Touch Screen Miscellaneous Add Indicators to a PSM Touch Screen Display Update the Date & Time on the Touch Screen Replace the Micro SD Card on a BSC I/O Module

---

---