Home - PSM

]]

• Consists of 2 components - a Touch Screen and an I/O Module
• Can be programmed using the VT3000 Core Software
• Alarms can be setup as Mono State, Dual State, or Tri-State
• Reasons Codes available on Set, Acknowledge, or Clear
• Accepts Data Fields on Alarms or Processes
• Accepts a Manual, on Screen, Count button
• Accepts a Process button - start and stop a process/procedure (Production, Job, etc.)
• Accepts a total of 4 manual Count buttons
• Accepts up to 4 wired inputs from an external source (Machine, Sensor, etc.)
  • Connected to the I/O Module

]]

Requirements

• I/O Mounting location free of metal enclosers.
• (2) 110v power outlets within 6 feet of module placement/location.
• Mounting location within 100’ of the Computer/Server, Repeater or Other Device.
• Touch Screen mounting location free of metal enclosures & within 15 feet of IO Module.
• Ensure the device is mounted in an easily accessible location.

Specifications

• Dimensions - IO Module - 5” (W) x 7” (L) x 2.5” (H)
• Dimensions - Touch Screen – 6.75” (W) x 10” (L) x – 1.25” Screen Thickness
• (1) 6’ Power Cord attached (IO Module)
• (1) 6’ Power Cord included (Touch Screen)

Instructions on Installing an I/O & Touch Screen

Instructions on Installing a Replacement Touch Screen

Instructions on Pairing an Existing Touch Screen

Alarms

Add an Alarm

Add an Alarm - Label

Add an Alarm - Reason Code

Add Communications to an Alarm

Process

Add a Process

Add a Data Field to a Process

Add a Count (I/O Input) to a Process

Add an Alarm to a Process

Control an Input (On or Off) with a Process

Count

Add a Manual Count Button

Data Field

Add a Key Input Data Field

Add a Shared List Data Field

Add a Static List Data Field

Device Configuration

Send a Configuration to a New/Not Configured PSM

Send an Updated Configuration to an Existing/Configured PSM

Copy/Duplicate an Existing PSM Configuration

Light Stack Attachment

Attach a Physical Light Stack to an I/O Module

Setup & Configure an Attached Light Stack

Setup & Configure the use of an Attached Light Stack

Wired Inputs

Connecting an I/O Input - External Source (Machine, Sensor, etc.)

Setup an I/O Input as an Alarm

Setup an I/O Input as a Count

Setup an I/O Input as a Dual State Alarm

Setup an I/O Input as a Tri-State Alarm

Setup an I/O Input as a Tri-State Alarm w/Reason on Acknowledge

Setup an I/O Input as a Continuous Count

Firware

Update the Firmware on a PSM (I/O & Touch Screen) - Wirelessly

Update the Firmware on a PSM (I/O & Touch Screen) - Manually

Update Touch Screen HMI Manually - Without a USB Port

Update Touch Screen HMI Manually - With a USB Port

Signal Strength

Test the Signal Strength (Mesh Signal)

Test the Bluetooth Signal Strength (I/O to Touch Screen Connection)

Isolation Code - ISO

Change the ISO (Isolation) Code using the Touch Screen

Change the ISO (Isolation) Code using the VT3000 Software - Wirelessly

Change the ISO (Isolation) Code using the Micro SD Card in the I/O Module - Manually

Other

Add Indicators to a Touch Screen Display

Update the Date & Time on the Touch Screen

Type Subject or Key Word to Query Archives

---